| Customization: | Available |
|---|---|
| Output Type: | Single |
| Warranty: | 1 Year |
|
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Features:
1.Full range AC 180-260V Input 50/60HZ
2. Output : 300W 12V 25A (MAX)
3. 100% full load burn-in test
4. Protections: Short circuit / Overload / Over voltage / Over temperature
5. 12 months warranty
6. Working Temp: -20ºC~50ºC (-4 ºF ~ 122ºF)
7. Storage Temp: -40ºC~85ºC (-40 ºF ~ 185ºF)
8. Safety Compliance: FCC / CE
Package included:
1 x Power Supply (Power cord is NOT included.)
| Model NO. | HY-300TF-12V | HY-300TBS-12V | HY-300TBD-12V | HY-300TBS-II-12V | HY-300TBD-II-12V |
| Power | 300W | 300W | 300W | 300W | 300W |
| Current | 25A | 25A | 25A | 25A | 25A |
| Voltage | 12V | 12V | 12V | 12V | 12V |
| Inlet stability | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
| Load stability | ±1.5% | ±1.5% | ±1.5% | ±1.5% | ±1.5% |
| Wave and noise | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p |
| Voltage regulation range | 11.5-12.5V | 11.5-12.5V | 11.5-12.5V | 11.5-12.5V | 11.5-12.5V |
| Working Temp | -20ºC-,50ºC | ||||
| Storage Temp | -40ºC.85ºC | ||||
| Size | 310*53*22mm/320g | ||||
| RisingTime | 2000ms,30ms@220Vac | ||||
| Hold up Time | 10m5 @220Vae, at full load | ||||
| Voltage Range | 176~264Vac200-380vdc | ||||
| Frequency Range | 47~63HZ | ||||
| Efficiency | 90% | ||||
| AC Current | 1.94A@220Vac | ||||
| Surge Current | 50A G220Vac Cold air dynamics | ||||
| Leakage Current | <0.75mA@220Vac | ||||
| Overload | 110%~150% of rated output power, protection mode; Hiccup mode, can be visually restored after removing abnormal conditions | ||||
| Over voltage | 110%~135% of rated output power, Protection mode; Hiccup mode, Can be visually restored after removing abnormal conditions | ||||
| Short circuit | Protection mode; Hiccup mode, can be visually restored after removing abnormal conditions,Can be short circuited for a long time | ||||
| operation Temp | -20ºC-,50ºC | ||||
| Operating Humidity | 20%~90%RH, No condensation | ||||
| Storage Temp ,humidity | -40ºC.85ºC,10%~95%RH | ||||
| Seismic Resistance | 100~500Hz,3G 10mins/cycle,60 mins each for the X Y and Z axes | ||||
| Safety Standard | Complies with CE/FCC | ||||
| Advantages | • Adopt high quality components | ||||
| • Powerful, stable and reliable | |||||
| • Built-in EMI filter circuit | |||||
| • Dual-tube forward program | |||||
| • Constant voltage and constant current output | |||||
| • Intelligent overload prevention | |||||
| • Semi-potted process | |||||
| • Stronger ability to adapt to the environment | |||||
| • Over-voltage, short-circuit, overload and temperature protection function | |||||
| • High reliability -100% full load burn-in test. | |||||
| Note: 1. Unless otherwise specified, all specification parameters are measured at an input of 220Vac, rated negative, and 25 "C ambient temperature. 2. Ripple and noise Runwu method: Use a 12 twisted pair cable, with terminals connected in parallel with 0.1UF and 47uF capacitors, and measure the ripple at a bandwidth of 20MHz. 3. Pressure accuracy: including setting error, linear adjustment , and negative adjustment rate. 4. Linear adjustment rate measurement method; Under a certain load, test from low input voltage to high input voltage, 5. Test method for load adjustment rate: from 0 to 100% rated load. 6. The startup time is measured in a cold start state, and rapid and frequent shutdowns may increase the startup time. |
|||||
1. Adopting brand new components
2. Powerful, stable and reliable, with built-in EMI filtering circuit
3 .Equipped with overvoltage, short circuit, and overload protection functions
4 .Double tube forward excitation scheme
5 .Constant power step-down mode output
6 .PCB coated with three proof paint on both sides
7. Strong environmental adaptability
If there have any model meets your requirement, please contact us get more detail
https://huayipower.en.made-in-china.com/product-list-1.html
Shenzhen Huayi Power, 200 staff, Shenzhen headquater and Hunan factory, have specialized in LED power supply and dirivers since 2021. Our products cover Rainproof / outdoor / indoor / engineering power supply and drivers, power adapter, electronic components, etc. Adhere to independent innovation, stable quality and low cost, our company has obtained a fast growth. Good product, professional solution and efficient service, are making us to be the trusted partners with cutomers coming from Ameica, Europe, Japan, domestic market, etc. https://huayipower.en.made-in-china.com/company-Shenzhen-Huayi-Power-Technology-Co-Ltd-.htmlOur company has a strong and experienced R&D team that can design products according to customer requirements and meet the needs of different customers with the best solutions. We adhere to the business philosophy of ""people-oriented, creating value, quality first, and improving innovation"". Our products are reasonable in price, stable in quality, and have a long lifespan.We warmly welcome new and old friends to cooperate with us ", Led Power Supply made in China!
50box/CTNS
We use standard shipping cardboard boxes to package your goods and take absolute safety measures. If you have packaging requirements, please let us know!
Q: Do you support sample service?
A: We support free sample services, but we are not responsible for shipping costs
Q: What is your MOQ of switch power supply?
A: Our MOQ is 1000PCS.
Q: Are you a factory or trading company?
A: We are factory
){kind=link}