| Customization: | Available |
|---|---|
| Output Type: | Single |
| Warranty: | 1 Year |
|
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Features:
1.Full range AC 180-260V Input
2. Output 400W 24V 16.7A
3. 100% full load burn-in test
4. Protections: Short circuit / Overload / Over voltage / Over temperature
5. 12 months warranty
| Model NO. | HY-400FC-12V | HY-400FC-24V | HY-400FEC-12V | HY-350FC-5V | HY-400FC-II-12V | HY-200FC-12V | HY-150FC-12V | HY-120FC-12V | HY-60FC-12V |
| Power | 400W | 400W | 400W | 350W | 400W | 200W | 144W | 120W | 60W |
| Current | 26.6A | 13.5A | 33.3A | 70A | 33.3A | 16.7A | 12A | 10A | 5A |
| Voltage | 12V | 24V | 12V | 5V | 12V | 12V | 12V | 12V | 12V |
| Inlet stability | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
| Load stability | ±1.5% | ±1% | ±1.5% | ±1.5% | ±1.5% | ±1.5% | ±1.5% | ±1.5% | ±1.5% |
| Wave and noise | 120mVp-p | 200mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p | 120mVp-p |
| Voltage regulation range | 11.5-12.5V | 23.5-24.5V | 11.5-12.5V | 4.5-5.5V | 11.5-12.5V | ||||
| Working Temp | -20ºC-,50ºC | ||||||||
| Storage Temp | -40ºC.85ºC | ||||||||
| Size | 191*117*50mm | 181*117*50mm | 166*94*50mm | 185*74*42mm | 145*74*42mm | 120*74*42mm | |||
| RisingTime | 2000ms,30ms@220Vac | ||||||||
| Hold up Time | 10m5 @220Vae, at full load | ||||||||
| Voltage Range | 176~264Vac200-380vdc | ||||||||
| Frequency Range | 47~63HZ | ||||||||
| Efficiency | 90% | ||||||||
| AC Current | 1.94A@220Vac | ||||||||
| Surge Current | 50A G220Vac Cold air dynamics | ||||||||
| Leakage Current | <0.75mA@220Vac | ||||||||
| Overload | 110%~150% of rated output power, protection mode; Hiccup mode, can be visually restored after removing abnormal conditions | ||||||||
| Over voltage | 110%~135% of rated output power, Protection mode; Hiccup mode, Can be visually restored after removing abnormal conditions | ||||||||
| Short circuit | Protection mode; Hiccup mode, can be visually restored after removing abnormal conditions,Can be short circuited for a long time | ||||||||
| operation Temp | -20ºC-,50ºC | ||||||||
| Operating Humidity | 20%~90%RH, No condensation | ||||||||
| Storage Temp ,humidity | -40ºC.85ºC,10%~95%RH | ||||||||
| Seismic Resistance | 100~500Hz,3G 10mins/cycle,60 mins each for the X Y and Z axes | ||||||||
| Safety Standard | Complies with CE/FCC | ||||||||
| Advantages | • Adopt high quality components | ||||||||
| • Powerful, stable and reliable | |||||||||
| • Built-in EMI filter circuit | |||||||||
| • Dual-tube forward program | |||||||||
| • Constant voltage and constant current output | |||||||||
| • Intelligent overload prevention | |||||||||
| • Semi-potted process | |||||||||
| • Stronger ability to adapt to the environment | |||||||||
| • Over-voltage, short-circuit, overload and temperature protection function | |||||||||
| • High reliability -100% full load burn-in test. | |||||||||
| Note: 1. Unless otherwise specified, all specification parameters are measured at an input of 220Vac, rated negative, and 25 "C ambient temperature. 2. Ripple and noise Runwu method: Use a 12 twisted pair cable, with terminals connected in parallel with 0.1UF and 47uF capacitors, and measure the ripple at a bandwidth of 20MHz. 3. Pressure accuracy: including setting error, linear adjustment , and negative adjustment rate. 4. Linear adjustment rate measurement method; Under a certain load, test from low input voltage to high input voltage. 5. Test method for load adjustment rate: from 0 to 100% rated load. 6. The startup time is measured in a cold start state, and rapid and frequent shutdowns may increase the startup time. |
|||||||||
1. Adopting brand new components
2. Powerful, stable and reliable, with built-in EMI filtering circuit
3 .Equipped with overvoltage, short circuit, and overload protection functions
4 .Double tube forward excitation scheme
5 .Constant power step-down mode output
6 .PCB coated with three proof paint on both sides
7. Strong environmental adaptability
Shenzhen Huayi Power, 200 staff, Shenzhen headquater and Hunan factory, have specialized in LED power supply and dirivers since 2021. Our products cover Rainproof / outdoor / indoor / engineering power supply and drivers, power adapter, electronic components, etc. Adhere to independent innovation, stable quality and low cost, our company has obtained a fast growth. Good product, professional solution and efficient service, are making us to be the trusted partners with cutomers coming from Ameica, Europe, Japan, domestic market, etc. https://huayipower.en.made-in-china.com/company-Shenzhen-Huayi-Power-Technology-Co-Ltd-.htmlOur company has a strong and experienced R&D team that can design products according to customer requirements and meet the needs of different customers with the best solutions. We adhere to the business philosophy of ""people-oriented, creating value, quality first, and improving innovation"". Our products are reasonable in price, stable in quality, and have a long lifespan.We warmly welcome new and old friends to cooperate with us ", Led Power Supply made in China!
We use standard shipping cardboard boxes to package your goods and take absolute safety measures. If you have packaging requirements, please let us know!
Q: Do you support sample service?
A: We support free sample services, but we are not responsible for shipping costs
Q: What is your MOQ of switch power supply?
A: Our MOQ is 1000PCS.
Q: Are you a factory or trading company?
A: We are factory
){kind=link}