| Customization: | Available |
|---|---|
| Output Type: | Single |
| Warranty: | 1 Year |
|
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Features:
1.Full range AC 180-260V Input 50/60HZ
2. Output : 400W 12V 33.3A (MAX)
3. 100% full load burn-in test
4. Protections: Short circuit / Overload / Over voltage / Over temperature
5. 12 months warranty
6. Working Temp: -20ºC~50ºC (-4 ºF ~ 122ºF)
7. Storage Temp: -40ºC~85ºC (-40 ºF ~ 185ºF)
8. Safety Compliance: FCC / CE
Package included:
1 x Power Supply (Power cord is NOT included.)
| Model NO. | HY-400FA-12V | HY-400FA-24V | HY-400FAC-12V | HY-400FAC-24V | HY-400FA-II-12V | HY-400FA-II-24V | HY-400GB-24V | HY-400GB-12V | HY-600FA-12V |
| Power | 400W | 400W | 400W | 400W | 400W | 400W | 400W | 400W | 600W |
| Current | 33.3A | 16.6A | 33.3A | 16.7A | 33.3A | 16.6A | 16.6A | 33A | 50A |
| Voltage | 12V | 24V | 12V | 24V | 12V | 24V | 24V | 12V | 12V |
| Inlet stability | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
| Load stability | ±1.5% | ±1% | ±1.5% | ±1% | ±1.5% | ±1% | ±1% | ±1.5% | ±1.5% |
| Wave and noise | 120mVp-p | 200mVp-p | 120mVp-p | 200mVp-p | 120mVp-p | 200mVp-p | 200mVp-p | 120mVp-p | 120mVp-p |
| Voltage regulation range | 11.5-12.5V | 23.5-24.5V | 11.5-12.5V | 23.5-24.5V | 11.5-12.5V | 23.5-24.5V | 23.5-24.5V | 11.5-12.5V | 23.5-24.5V |
| Size | 191*117*50mm | 179*109*51mm | 179*109*51mm | 204*117*50mm | 204*117*50mm | 217*118*50mm | |||
| Working Temp | -20ºC-,50ºC | ||||||||
| Storage Temp | -40ºC.85ºC | ||||||||
| RisingTime | 2000ms,30ms@220Vac | ||||||||
| Hold up Time | 10m5 @220Vae, at full load | ||||||||
| Voltage Range | 176~264Vac200-380vdc | ||||||||
| Frequency Range | 47~63HZ | ||||||||
| Efficiency | 90% | ||||||||
| AC Current | 1.94A@220Vac | ||||||||
| Surge Current | 50A G220Vac Cold air dynamics | ||||||||
| Leakage Current | <0.75mA@220Vac | ||||||||
| Overload | 110%~150% of rated output power, protection mode; Hiccup mode, can be visually restored after removing abnormal conditions | ||||||||
| Over voltage | 110%~135% of rated output power, Protection mode; Hiccup mode, Can be visually restored after removing abnormal conditions | ||||||||
| Short circuit | Protection mode; Hiccup mode, can be visually restored after removing abnormal conditions,Can be short circuited for a long time | ||||||||
| operation Temp | -20ºC-,50ºC | ||||||||
| Operating Humidity | 20%~90%RH, No condensation | ||||||||
| Storage Temp ,humidity | -40ºC.85ºC,10%~95%RH | ||||||||
| Seismic Resistance | 100~500Hz,3G 10mins/cycle,60 mins each for the X Y and Z axes | ||||||||
| Safety Standard | Complies with CE/FCC | ||||||||
| Advantages | • Adopt high quality components | ||||||||
| • Powerful, stable and reliable | |||||||||
| • Built-in EMI filter circuit | |||||||||
| • Dual-tube forward program | |||||||||
| • Constant voltage and constant current output | |||||||||
| • Intelligent overload prevention | |||||||||
| • Semi-potted process | |||||||||
| • Stronger ability to adapt to the environment | |||||||||
| • Over-voltage, short-circuit, overload and temperature protection function | |||||||||
| • High reliability -100% full load burn-in test. | |||||||||
| Note: 1. Unless otherwise specified, all specification parameters are measured at an input of 220Vac, rated negative, and 25 "C ambient temperature . 2. Ripple and noise Runwu method: Use a 12 twisted pair cable, with terminals connected in parallel with 0.1UF and 47uF capacitors. and measure the ripple at a bandwidth of 20MHz. 3. Pressure accuracy: including setting error, linear adjustment , and negative adjustment rate. 4. Linear adjustment rate measurement method; Under a certain load, test from low input voltage to high input voltage. 5. Test method for load adjustment rate: from 0 to 100% rated load. 6. The startup time is measured in a cold start state, and rapid and frequent shutdowns may increase the startup time. |
|||||||||
Q: Do you have any minimum order quantity (MOQ) requirements?
A: Absolutely,our MOQ is 1000 pieces.
Q: Do you offer a guarantee for your products?
A: Certainly, we provide a 1-year product guarantee!
Q: How do you ship the goods, and how long does it take for them to arrive?
A: We usually ship via DHL, UPS, FedEx, or EMS, and it typically takes 3-5 days to arrive. We also offer optional airline and sea shipping.
Q: How do you handle faulty products?
A: Firstly, our products are manufactured under a strict quality control system, resulting in a very low defect rate. Secondly, during the guarantee period, we will send new products with your new order for small quantities. For defective batch products, we will repair them and resend them to you, or we can discuss a solution, including a recall, based on the actual situation.
){kind=link}